Radio; Selecting Tuner Band; Tuning To A Station; Using Presets - RCA RS2028 User Manual

RS2028 3/5/03 8:40 AM

Radio

EN

Selecting Tuner Band

1. Press SOURCE on the main unit or TUNER on the
remote control to enter Tuner (TU) mode.
2. Press BAND/APP to select between AM or FM
radio band.
Tip: Your audio system has 30 preset stations.

Tuning to a Station

Press SKIP FORWARD
on the main unit or TUNING
remote control to select frequency.

Using Presets

The tuner can be in either TUNE or PRESET mode.
When in preset mode,
• Press PRESET DN or UP on the main system or
PRESET or on the remote control to
access the previous or next preset station.
• The display first shows the preset program
number and after a few seconds, the preset
program and frequency will be displayed.
Pr 01
07
87.90
FM
8
Page 12

Auto Preset Programming

Press and hold BAND/APP button for 2 seconds to
scan stations in FM and AM band. The stations will
then be stored as preset channels. A maximum of 30
stations can be stored. Beware of your preset chan-
nels being erased accidentally because the scanning
and storing process is automatic upon pressing the
button. You can stop the automatic scan by pressing
any button, but the erased stations cannot be recov-
ered.
/ SKIP BACKWARD
or on the

Manually Setting Presets

1. Press SKIP FORWARD
BACKWARD
frequency.
2. Press the PROG/SET button once.
3. The most recently accessed program location will
be displayed.
4. If a different program location is preferred, press
PRESET DN or UP on the main unit or
PRESET
to move to the desired preset number (1-30).
5. Press PROG/SET to store the selected frequency
at that preset.

Suppressing Stereo Signal

Press STEREO to toggle between FM mono and
stereo for stereo FM stations.
MHz
FM
AP
87.90
MHz
/ SKIP
to access the desired
or on the remote control