Advertisement
Cooking
1.
Touch the Power button for three seconds. After power on,
the buzzer beeps once, all displays show "–" or "– –",
indicating that the induction hob has entered standby mode.
2.
Place a suitable pan on the cooking zone that you wish to
use.
o
Make sure the bottom of the pan and the surface of
the cooking zone are clean and dry.
3.
Touch the heating zone selection control and an indicator
next to the key will flash
4.
Select a heat setting by touching the "-" or "+" control.
o
If you don't choose a heat setting within 1 minute,
the Induction hob will automatically switch off. You
will need to start again at step 1.
o
You can adjust the heat setting at any time during
cooking.
5.
If the display flashes,
this means that:
o
you have not placed a pan on the correct cooking
zone
o
the pan you're using is not suitable for induction
cooking
o
the pan is too small or not properly centred on the
cooking zone
o
Heating will not take place unless there is a suitable
pan on the cooking zone.
o
The display will automatically turn off after 1 minute
if suitable pan is not placed on it.
16
alternately with the heat setting,
Advertisement
