DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Creating Ethernet WAN Connection
Prior to creating an Ethernet WAN connection, specify a LAN port that will be used as the WAN
port (see the EtherWAN section, page 120).
Figure 59. The page for creating a new connection. The General settings, Ethernet, and VLAN sections.
Parameter
Provider
Connection Type
Interface
Name
Enable
Direction
General settings
Leave the Manually value.
A type of network protocol to be used by the connection. Available
values:
PPPoE
•
IPv6 PPPoE
•
PPPoE Dual Stack
•
Static IP / Dynamic IP
•
Static IPv6 / Dynamic IPv6
•
Bridge.
•
Select the value corresponding to the LAN port specified as the
WAN port.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Page 80 of 181
Configuring via Web-based Interface
Description