Ethernet Wan Connection - D-Link DSL-2740U Quick Installation Manual

DSL-2740U

Ethernet WAN Connection

1. Go to the Advanced / Interface grouping page.
2. Place the mouse pointer on the router's LAN port that will be used as the
WAN port and click the Make WAN line in the menu displayed. Click
the Save link.
3. Go to the Net / WAN page and click the Add button.
In the General settings section, from the Provider drop-down list,
4.
leave the Manually value.
5. From the Connection Type drop-down list, select the needed value.
6. From the Interface drop-down list, select the value corresponding to the
LAN port that will be used as the WAN port.
7. Specify a name for your connection (any name for easier identification) in
the Name field.
Quick Installation Guide
18