D-Link DSL-2750U User Manual page 158

Wireless adsl2+ router with 3g/lte/ethernet wan support and usb port
Hide thumbs Also See for DSL-2750U:
Table of Contents

Advertisement

DSL-2750U Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
When the checkbox is selected, the Default mode selection section is displayed on the page.
Select the needed choice of the radio button to configure filtering for all devices of the router's
network:
Safe mode: when this value is selected, the service blocks access to malicious and
fraudulent web sites;
Child mode: when this value is selected, the service blocks access to malicious and
fraudulent web sites and blocks access to adult content;
Protection off: when this value is selected, the service provides the DNS server with no
restrictions on access to unsafe web sites.
Also the selected filtering mode will be applied to all devices newly connected to the router's
network.
If you need to specify a filtering mode for each device separately, create relevant rules. To do this,
go to the Yandex.DNS / Internet protection settings / Devices page.
Figure 122. The Yandex.DNS / Internet protection settings / Devices page.
On the opened page, in the Clients without rules section, the devices which filtering mode is
specified on the Yandex.DNS / Internet protection settings / Settings page are displayed.
The name of the mode is displayed in the Mode chosen by default section.
Page 158 of 181
Configuring via Web-based Interface

Advertisement

Table of Contents
loading

Table of Contents