Connections
TV With Audio/Video Jacks and DIGITAL
Satellite Receiver
This connection assumes:
•
You have an advanced digital satellite receiver and your TV
has audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR, recording from receiver while
watching cable or off-air channel, and recording one cable or off-
air channel while watching another.
To use this connection, you must have:
•
(3) coaxial cables and (6) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the steps.
Using this Connection
•
Tune your TV to its video input to record (or watch) the VCR
or digital satellite receiver.
•
To record from the digital satellite receiver, tune your VCR to
its line input. L1 appears in the display.
To play a tape:
1. Insert a tape.
2. If necessary, press VCR and then PLAY.
To record one off-air or cable program and watch another:
1. Begin recording a program using a recording feature.
2. Select a different channel on the TV.
To record a digital satellite receiver program and watch a cable
or off-air channel:
1. Turn on the receiver, tune the VCR to its line input, and begin
recording a program using a recording feature.
2. Select a different channel on the TV.
50
CABLE OR ANTENNA
SATELLITE SIGNAL
SATELLITE RECEIVER
IN FROM ANT
VIDEO
R AUDIO
OUT TO TV
CH3
S-VIDEO
CH4
VCR
R–AUDIO–L
VIDEO
OUT
OUT
IN
IN
CH3 CH4
LINE 1
TV
VIDEO
VIDEO
R
INPUT 1
INPUT 2
R
R
L/MONO
L/MONO
L
S-VIDEO
AUDIO
OUTPUT
SATELLITE
IN
L
VHF
UHF
IN FROM ANT
OUT TO TV
CABLE/
ANTENNA