Table of Contents
Advertisement
RECORDING
Playing Back Audio Only
To get stereo sound, connect the AUDIO OUT jacks of the VCR
to the appropriate input on your amplifier or receiver. Do not
use the phono input. Refer to your amplifier or receiver user's
guide.
Using Two VCRs For Copying
and Editing Tapes
Use one VCR as the playback VCR and the other as the
recording VCR.
1. Connect the VCRs using the diagram at the right.
2. Turn on both VCRs and TV.
3. Tune the TV to the VCR viewing channel (either 3, 4, or
TV's video input). (See "How to Find Your TV's Video Input
Channel" in the Reference section of this manual for more
information.)
4. If you are using coaxial cables for the connection, tune
recording VCR to channel 3 or 4—the one selected on the
playback VCR.
If you are using audio/video cables, select the line input on
the recording VCR.
5. Insert the tape you want to copy into playback VCR. Insert
a blank tape with its safety tab in place into recording
VCR.
6. Using visual search, locate the segment you want to copy
on the playback VCR. Pause the tape at this location.
7. Press RECORD on the recording VCR, then PAUSE.
8. Press PAUSE on both VCRs to begin copying.
9. Press PAUSE on both VCRs to stop copying.
10. Repeat steps 6–9 to copy or edit additional segments.
30
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
Two VCR Connection
CABLE BOX
IN
OUT
OR ANTENNA
PLAYBACK VCR
R — AUDIO — LVIDEO
OUT
OUT
IN
IN
CH3 CH4
LINE 1
RECORDING VCR
OUT
L
R
OR
TO TV
VHF
UHF
IN FROM ANT
OUT TO TV
OR
IN
ANT. IN
VIDEO
AUDIO
RF OUT
3 CH. 4
TO TV
Advertisement
Table of Contents
