Table of Contents
Advertisement
Connections
TV With RF Jack and Digital Satellite
Receiver
This connection assumes:
•
You have a basic digital satellite receiver and your TV does
not have audio/video input jacks.
This connection provides:
•
Stereo sound playback from VCR, recording from a digital
satellite receiver, and recording one off-air or cable channel
while watching another.
To use this connection, you must have:
•
(4) coaxial cables and (3) audio/video cables
To connect:
1. Connect cables as shown.
2. Return to the First Things First Section, then follow the steps.
Using This Connection
•
Tune your TV to channel 3 or 4, whichever one you selected
with the CH3/CH4 switch on the back of the VCR.
•
To record and watch off-air or cable, tune your VCR to
channel 3 or 4 whichever one you selected with the CH3/CH4
switchon the back of the receiver. Turn off receiver.
•
To watch and/or record from the digital satellite receiver,
tune your VCR to its line input. L1 appears in display.
To play a tape:
1. Insert a tape.
2. If necessary, press VCR and then PLAY.
To record one off-air or cable program and watch another:
1. Turn off the digital satellite receiver and begin recording a
program using a recording feature.
2. Press TV•VCR and select a different channel on the TV.
To record a digital satellite receiver program:
1. Turn on the receiver, tune the VCR to its line input, and begin
recording a program using a recording feature.
Caution
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
CABLE,CABLE BOX OR ANTENNA
SATELLITE RECEIVER
IN FROM ANT
VIDEO
OUT TO TV
CH3
S-VIDEO
CH4
VCR
R–AUDIO–L
OUT
IN
CH3 CH4
TV
SATELLITE SIGNAL
SATELLITE
IN
R AUDIO
L
VHF
UHF
VIDEO
IN FROM ANT
OUT
OUT TO TV
IN
LINE 1
CABLE/
ANTENNA
49
Advertisement
Table of Contents
