Table of Contents
Advertisement
Playing a Tape
Using the Playback Features
Tape Length
You must select the correct tape length of the tape you are using for playback (or
record). This is important for the "remaining time" display to be accurate.
1.
2.
3.
Repeat Function
The VCR allows you to select two types of tape repeat functions during playback:
Last 5 seconds and From Counter zero. When "Last 5 Seconds" is selected, the
VCR reverse searches the last 5 seconds of the tape and then plays it back (also
works in slow motion). When"From Counter zero" is selected, the VCR reverse
searches to time counter 0:00:00 and begins playback again.
1.
2.
3.
4.
5.
Audio Playback (Tapes must be in stereo)
The VCR records the same audio on both the Hi-Fi and linear tracks on the tape.
The Hi-Fi sound is recorded on separate left and right stereo channels, and mono
sound is recorded on the linear track. To enjoy Hi-Fi sound, connect your VCR to
a stereo television or amplifier/receiver using the audio/video jacks. The AUDIO
has no effect for those tapes that are not stereo.
To Select Playback Sound
Press AUDIO to switch among HI-FI, LEFT, RIGHT, or
MONO.
20
Press MENU to see the MAIN MENU.
Press DOWN ARROW to highlight "VCR function
setup," then press ENTER.
Press RIGHT or LEFT ARROW to select the
tape length.
The tape length is printed on the tape box.
Press MENU to see the MAIN MENU.
Press DOWN ARROW to highlight "VCR function
setup," then press ENTER.
Press DOWN ARROW to highlight
"Segment repeat".
Press the DOWN ARROW to select the
segment type.
Press the REPEAT DOWN ARROW to select the
segment type.
• Select HI-FI to play back stereo sound recorded
on the Hi-Fi track. Hi-Fi indicator lights in the
VCR's display.
• Select LEFT to play back sound on the linear
track for the left channel only.
• Select RIGHT to play back the sound recorded
on both the linear track and the Hi-Fi track for
the right channel only.
• Select MONO to play back sound recorded on
the linear track, such as a second audio
program (SAP). Hi-Fi indicator turns off in the
VCR's display.
MAIN MENU
1 Timer recording list
2 Clock set/adjust
3 Antenna/Cable set
MAIN MENU
4 Channel memory set
5 VCR function setup
1 Timer recording list
6 StarSight setup
2 Clock set/adjust
3 Antenna/Cable set
4 Channel memory set
5 VCR function setup
6 StarSight setup
VCR FUNCTION
Press ENTER to SELECT
1
Tape length T120
T160 T180
2
Tape dubbing mode
ON
3
Auto play
ON
Press ENTER to SELECT
4
Segment repeat
- Last 5 seconds
- From counter zero
Press ENTER to CHANGE
MAIN MENU
1 Timer recording list
2 Clock set/adjust
3 Antenna/Cable set
MAIN MENU
4 Channel memory set
5 VCR function setup
1 Timer recording list
6 StarSight setup
2 Clock set/adjust
3 Antenna/Cable set
4 Channel memory set
5 VCR function setup
6 StarSight setup
VCR FUNCTION
Press ENTER to SELECT
1
Tape length T120
T160 T180
2
Tape dubbing mode
3
Auto play
Press ENTER to SELECT
4
Segment repeat
- Last 5 seconds
- From counter zero
Press ENTER to CHANGE
(
HI-FI
)
(
)
(
(
)
)
(
LEFT
)
(
(
)
)
(
)
(
RIGHT
)
(
)
(
)
(
)
(
MONO
)
(
(
)
)
(
)
OFF
OFF
5s
0
ON
OFF
ON
OFF
5s
0
Advertisement
Table of Contents
