Table of Contents
Advertisement
Setting Up the VCR
Startup
7. Set the time and date.
The VCR automatically sets the clock, updates to the
current time, and adjusts to daylight savings time every
time the VCR is turned off. Or, you may manually set
the clock.
8. Place channels in the VCR's memory.
The VCR automatically scans through all channels in
your area and adds them to the VCR's memory.
A. Press MENU to bring up the MAIN MENU.
B. Press the DOWN ARROW to highlight "Clock
set/adjust," then press ENTER.
C. Select AUTO or MANUAL by using the ARROW
buttons.
• AUTO CLOCK SET: Tune the VCR to the PBS
station before turning off the VCR. If you don't, it
takes longer for the VCR to set the clock. If you
use a cable box, turn on the cable box and tune it
to the PBS station before turning the VCR off. See
"PBS Stations" on pages 44-46.
• MANUAL CLOCK SET: Use the number buttons
to enter the time and date. Enter a "0" before
single digits, such as 0, then 5, then 0, then 7 for a
time of 5:07.
D. Follow the on-screen instructions to manually set
the clock.
A. Press MENU to bring up the MAIN MENU.
B. Press the DOWN ARROW to highlight "Channel
memory set," then press ENTER.
C. Press PROG to begin adding channels to memory.
Your VCR begins scanning through the channels
and displays only those channels programmed into
the VCR's memory with a green background.
MAIN MENU
1 Timer recording list
2 Clock set/adjust
3 Antenna/Cable set
MAIN MENU
4 Channel memory set
5 VCR function setup
1 Timer recording list
6 StarSight setup
2 Clock set/adjust
3 Antenna/Cable set
CLOCK SET/ADJUST
4 Channel memory set
5 VCR function setup
6 StarSight setup
Clock mode AUTO
MANUAL
Press ENTER to SELECT
AUTO CLOCK SET
Use
to SELECT
Press ENTER to SELECT
The clock is set and
adjusted automatically when
Press ENTER to CONTINUE
the VCR power is turned OFF
NOTE
For best results,
tune VCR to your
nearest PBS station
before turning it OFF
(See User's Guide for listing)
OR
CLOCK SET/ADJUST
Enter present TIME
- - : - -
To correct use
MAIN MENU
1 Timer recording list
2 Clock set/adjust
3 Antenna/Cable set
MAIN MENU
4 Channel memory set
5 VCR function setup
1 Timer recording list
6 StarSight setup
2 Clock set/adjust
3 Antenna/Cable set
4 Channel memory set
5 VCR function setup
6 StarSight setup
CHANNEL MEMORY
Press ENTER to SELECT
Press ENTER to SELECT
Press PROG for AUTO SETTING
Press Enter to ADD/DELETE
CHANNEL MEMORY
2
3
4
5
7
8
9
10
11
11
13
Please wait...
Press EXIT to STOP memorizing
2
14
9
Advertisement
Table of Contents
