Kraus Sellette KPF-1683SFS-KSD-80SFS Installation Manual page 9

Step 4. Attach spray hose and counterweight
7
5
Step 5. Connect waterlines
6
8
Connect spray hose (5)
to quick connector (7)
attached to supply line.
Install weight (6) on lowest
vertical point on spray
hose (5).
Connect waterlines (8) to angle
stops. Tighten both ends of
waterlines with a wrench
until snug. Turn on hot and
cold angle stops and check
for leaks.
NOTE: Make sure filter
washers are installed.
9