Set Up With Your Phone - Fitbit Zip Flex 2 User Manual

1. Plug the charging cable into the USB port on your computer, or a UL-certified
USB wall charger, or another low-energy charging device.
2. Press the tracker into the compartment on the charging cable The pins on the
charging cable must align with the corresponding pins on the back of the
tracker and lock securely in place. You'll know the connection is secure when
the tracker vibrates and you see the indicator lights blinking, indicating your
progress towards a total charge.
Charging fully takes about 2 to 3 hours. While the tracker charges, each white light
that turns on represents 25% of the maximum charge. When Flex 2 has charged
completely, you'll see a green light and then all 5 lights will shine for a few seconds
before turning off. If you don't see any lights flashing, you can double-tap your
tracker to check the charging progress. You'll know your tracker is fully charged
when you see 1 green and 4 white indicator lights.

Set up with your phone

Set up Flex 2 with the Fitbit app for iPhones and iPads or Android phones. The Fitbit
app is compatible with most popular phones and tablets. For more information, see
fitbit.com/devices.
6