Maintenance; Cautions; Factory Default Settings - optris PI Operator's Manual

Maintenance

Lens cleaning: Blow off loose particles using clean
compressed air. The lens surface can be cleaned with a soft,
humid tissue moistened with water or a water based glass
cleaner.

Cautions

Avoid static electricity, arc welders, and induction heaters. Keep away from very strong EMF (electromagnetic
fields). Avoid abrupt changes of the ambient temperature.
In case of problems or questions which may arise when you use the infrared camera, please contact our service
department.

Factory Default Settings

The unit has the following presetting at time of delivery:
Temperature range
Emissivity
Process interface (PIF)
Interprocess Communication (IPC)
Measurement function
4
-20...100 °C
0,970
inactive
inactive
Cross hairs (3x3 pixels)
optris PI – E2008-06-A
PLEASE NOTE: Never use cleaning
compounds which contain solvents
(neither for the lens nor for the housing).