optris PI Operator's Manual page 3

CE-Conformity
The product complies with the following standards:
EMC:
Safety Regulations:
The product accomplishes the requirements of the EMC Directive
89/336/EEC and of the low-voltage directive 73/23/EEC.
Read the manual carefully before the initial start-up. The producer reserves the right to change the herein described
specifications in case of technical advance of the product.
Warranty
Each single product passes through a quality process. Nevertheless, if failures occur please contact the customer service at
once. The warranty period covers 24 months starting on the delivery date. After the warranty is expired the manufacturer
guarantees additional 6 months warranty for all repaired or substituted product components. Warranty does not apply to
damages, which result from misuse or neglect. The warranty also expires if you open the product. The manufacturer is not
liable for consequential damage. If a failure occurs during the warranty period the product will be replaced, calibrated or
repaired without further charges. The freight costs will be paid by the sender. The manufacturer reserves the right to
exchange components of the product instead of repairing it. If the failure results from misuse or neglect the user has to pay
for the repair. In that case you may ask for a cost estimate beforehand.
EN 61326-1
EN 61010-1:1993/ A2:1995
optris PI – E2008-06-A
Optris GmbH
Ferdinand-Buisson-Str. 14
D – 13127 Berlin
GERMANY
Tel.: +49-30-500 197-0
Fax: +49-30-500 197-10
E-mail: info@optris.de
Internet: www.optris.com
1