Table of Contents
Advertisement
Appendix: reference
Display Panel
TIME The current time appears. Only an AM indicator appears with the time.
There is no indicator for PM.
TIME COUNTER This shows the actual time it takes to play back a segment of a
recorded tape. This counter helps locate the beginning or end of programs taped.
REC INDICATOR Lights when the VCR is recording.
TIMER INDICATOR (
VCR is set for a timer recording and the VCR is turned off. Flashes when the clock is not
set. Flashes when the timer recording is set and there is no tape in the VCR.
VCR INDICATOR (Applies only if the VCR Viewing Channel is 3 or 4.) Press the
TV•VCR button on the remote or front VCR panel to turn on or off.
•
VCR Indicator on: Picture from VCR
•
VCR Indicator off: Picture from the TV channel.
Back Panel
3 CH. 4 Switch Selects the channel to which you will tune the TV to see the VCR
picture if you connect the VCR using one of the basic hookups.
AUDIO and VIDEO IN Jacks Receives signals from another component, like a VCR or
camcorder, when it is connected to these jacks. Use INPUT on the remote to select "L" to
record from these jacks.
AUDIO and VIDEO OUT Jacks Sends audio and video signals to another component,
like a TV or other VCR, when connected with these jacks.
ANT IN Jack Receives a signal from an antenna or cable system when attached.
RF OUT Jack Passes signal to TV using the cable supplied.
) Lights during an express or timer recording or when the
ANT. IN
AUDIO
OUT
IN
RF OUT
CH
VIDEO
3
4
59
Advertisement
Table of Contents
