RCA VR557 User Manual page 8

First Things First
If the menu does not appear:
• Make sure the TV is tuned to the same channel as the 3 CH 4
switch or the TV's video line input (see "How to Find the TV's
Video Input Channel" in the References section of this
manual for more information).
• Make sure the VCR indicator is on in the VCR display if you
connected your VCR using the ANT IN and RF OUT jacks.
• Check your connections.
If you chose to set up your VCR options individually, then go to
the next section.
STEP 8: Access the menus
The MENU and number buttons let you access, select, and change
your VCR's preferences. For example, to select a different
preferred on-screen language than the one you selected during
the initial set up, do the following:
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recodings
3 Time
4 Channels
5 Setup
6 Preferences
7 Language
0 Exit
2. Press 7 to display the LANGUAGE menu.
LANGUAGE
Select a language.
1 > English
2 Español
3 Français
Press MENU to continue
3. On the remote control, press one (1) for English, two (2) for
Spanish, and three (3) for French.
All other on-screen menus are worked in similar ways using
the remote control to follow on-screen instructions.
See Additional Set-Up Features in the next section for
detailed information about accessing menus.
6