appendix: reference
Internal clock shows incorrect time or date
•
Power interruption.
•
Check to make sure the clock is set accurately (check AM/PM and
date).
•
Check Daylight-Saving setting. The clock may have adjusted for
daylight-saving time.
Time did not adjust for daylight-saving time
•
Check to make sure daylight-saving feature is set correctly.
VCR makes noise when stopped
•
VCR is removing tape from heads. This is normal. The head cylinder
inside the VCR will continue to rotate for a few minutes after you
put the VCR in the stop mode.
Will not AUTO CHANNEL SEARCH active channels correctly
•
Check to make sure the antenna connections are secure and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA feature is set
correctly.
•
If Detect Automatically was selected for the Signal Type in the AUTO
CHANNEL SEARCH menu, try using either CABLE TV or ANTENNA
instead.
•
May not be necessary if using a cable box for all channels. Contact
your local cable company for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/
ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not start to play
automatically
•
Check to make sure the Auto Play ON/OFF feature is set to ON.
TIMER indicator flashes
•
Clock is not set.
•
Check to make sure there is a cassette in the VCR when a timer
recording is set.
•
TIMER and RECORD indicators flash when the ProTect Plus
feature is activated.
Time counter disappears during searching
•
This is normal.
TM
Locking
55