Table of Contents
Advertisement
RECORDING
6. Review the information to make sure it is correct, and then
press MENU to save.
Program 1 (One time)
Channel
03 Cable
Start Time 08:00 PM
End Time
09:30 PM
Start Date 10/24/97 Fri
Tape Speed SLP
1=SP 2=SLP
Press CLEAR to correct
Press MENU to save
Timer Recording with VCR PluS+
You can use VCR Plus+ to simplify timer programming if you have
cable TV and don't receive all channels through a cable box or if
you get your TV signal off-air.
Setting Up the Channel List
If you did not set up the VCR Plus+ channel list, you can do it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List menu.
3. Go to Setting Up Your VCR if you need more information on
setting up your VCR Plus+ channel list.
Using VCR Plus+
1. Press MENU to display the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Language
0 Exit
2. Press 1 to display the VCR PLUS+ menu.
VCR PLUS+
Enter pluscode number
(from TV listing)
-
Press MENU to cancel
VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
26
Program 1 has been saved
Remember to insert a
recordabel tape and
turn the VCR off before
the program start time.
Press MENU to continue
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
CHANNELS
6 Language
1 Auto Channel Search
2 Add/Remove Channels
0 Exit
3 Signal Type:
CABLE
4 VCR Plus+ Channel List
VCR+ Channel
My Channel
5
46
0 Exit
4
--
3 -> -> ->
23
2
--
1
--
Use CH+/- to select
Press 0-9 to change
Press MENU to save
Advertisement
Table of Contents
