Timer Recording With Vcr Plus; Setting Up The Channel List; Usingvcr Plus - RCA VR624HF User Manual

6.
Review the information to make sure it is correct, and then
press MENU to save.
Program 1 (One time)
Channel 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 10/24/97 Fri
Tape Speed SLP
1-SP 2-SLP
Press CLEAN to corect
Press MENU to save
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
TIMER RECORDING WITH VCR PLUS+
You can use VCR Plus+ to simplify timer programming by
entering the TV show's PlusCode number found in most TV
and cable listings.
Setting Up the Channel List
If you did not set up the VCR Plus+ channel list, you can do
it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR PLUS+ CHANNEL LIST menu.
3. Go to Setting Up Your VCR if you need more information
on setting up your VCR Plus+ channel list.
Using VCR Plus+
1. Press MENU to bring up the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2.
Press 1 to display the VCR PLUS+ menu.
VCR PLUS+
Enter PlusCode Number
(From TV Listing)
VCR MAIN MENU
VCR Plus+
Timer R_nr_imn_
CHANNELS
1 Auto Channel Search
2 AddlRemove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
5 Cable Box Setup
VCR÷ Channel My Channel
5 46
4 --
3 -> -> -> 23
2 --
1 --
Use CH+/- to select
Press 0-9 to change
Press MENU to save
28
Press MENU to cancel
VCRPlus+ and PlusCode are trademarks of Gemstar Development Corporation.