Table of Contents
Advertisement
using the cd player
Recalling and Editing the ATS Program
Editing the ATS program is a lot like editing a regular program.
1.
Press the ATS button to go to AUTO TRACK SKIP mode.
2.
Press PROGRAM to move to the next program number until you
get to the programmed track you want to change.
3.
Press DISC SKIP to choose the disc, and then press
or
4.
Press the PROGRAM button to change the current skipped track
to the one you just selected.
Clearing the ATS Program
Clearing the ATS program is also a lot like clearing a regular
program. You can unplug the unit, or you can
1.
Press the ATS button.
2.
Press PROGRAM to select the first program number you
want to clear.
3.
Press
or
4.
Press PROGRAM to clear all tracks to the end of the program.
Front Panel Display Messages
When using the CD function, you may encounter the following
messages.
Message
Meaning
CD function is active
CD drawer is in.
CD drawer is out.
Remain time is unavailable. (Displayed when the track number is beyond 32.)
There are no discs in the CD drawer.
No tracks are programmed (applies to both Program and ATS mode).
No tracks are available in program play mode or ATS mode.
Program is full (applies to both Program and ATS mode).
Reading disc's table of contents (how many tracks it has and the total time for the disc). This
information is displayed in Stop mode.
to choose a replacement track.
until you get to track number 00.
AUTO TRACK SKIP
TRACK
1
2
3 4 5
6
7
8
9 10 11 12
The first ATS program number (PR 01) contains
track 08.
AUTO TRACK SKIP
TRACK
2
3
Track 6 is selected to replace track 8 as the first
programmed track to be skipped.
AUTO TRACK SKIP
TRACK
1 2
3 4 5
6
7
8
9 10 11 12
Notice that when play begins, track 6 does not
appear in the Music Calendar and will be
skipped.
16 +
13
14 15
9
0
13
14 15
16 +
11
Hide quick links:
Advertisement
Table of Contents
