Table of Contents
Advertisement
First Things First
step 1: unpack the audio system
Unpack the system and the accessories. The accessories packed with
the receiver include the RCA Remote Control (CRK290), two speakers,
one FM wire antenna and Important Safeguards.
STEP 2: check for moisture
Just as moisture can form on the inside of windows on a cold day, it
can also form on the inside of your stereo, causing it to malfunction.
If moisture forms inside this player, it may not operate properly. To
correct the problem, turn off the power and wait about 30 minutes for
moisture to evaporate.
step 3: choose system location
These guidelines should be followed when setting up your system:
•
Choose a level, solid, surface. Don't place it on a soft surface, such
as carpeting or foam rubber.
•
Choose a location away from direct sunlight, radiators, air ducts,
and other sources of heat.
•
Avoid locations that are subject to moisture, mechanical vibration,
shock, or excessive dust.
•
Make sure that the location has adequate air circulation. Good
ventilation is essential to protect the system from internal heat
build up.
For optimal listening:
•
Speakers should be placed at least several feet apart and facing
the listener.
•
Speakers should be placed at least two to three feet from the wall
to avoid accentuated bass response.
2
Be a Pack Rat
It's a good idea to keep the box and all
of the packing materials when you're
done unpacking the system in case you
need to store, move, or ship the unit at a
later date
Hide quick links:
Advertisement
Table of Contents
