Icons Used in the Display
Icon
Represents
Disc
ESP Tank
E S P
Repeat track
Repeat all
HOLD
Battery icon
Appendix B: Troubleshooting Guide
Problem
Disc is in place, but won't play
Indicates
Play/Pause modes and Track/Search modes (does not spin during Stop mode.)
Amount of information held in memory for the electronic skip protection feature (see p. 6).
That the current track number will be repeated.
That all tracks are repeated.
HOLD switch is turned on.
Blinks when battery power is low.
Cause
No power
Disc is in backwards
Disc is dirty
Batteries are weak
HOLD is active
Adapter plugged into jack but not
into power source
CD door is not closed tightly
Disc not seated correctly
Solution
Make sure power adapter is getting power from outlet
Insert disc with label up (p. 3)
Clean the disc (p. 11) or try another disc
Replace batteries or try AC power
Turn off HOLD switch
Remove adapter from player to use with batteries,
or plug into outlet
Close door tightly
Press down firmly (p. 3)
table continues
13