Appendix C: Headphone Safety - RCA RP-7925 Instruction Manual

Troubleshooting Guide Continued
Problem
Sound skips
Disc is in place, player is in play mode,
but still no sound
Unit will not scan the disc. Play is erratic.

Appendix C: Headphone Safety

For your comfort, health and safety, be sure to observe the following guidelines when using headphones:
Hearing Comfort and Well Being
• Always turn volume down to the minimum setting before plugging in the headphones.
• Don't listen at a high volume.
• Hearing experts advise against extended continuous listening through a headset.
• If you experience a ringing in your ears, reduce volume or discontinue use.
Safety
• Don't use headphones while operating a motorized vehicle. This can create a traffic hazard and is illegal in many areas.
• Do not use headphones in potentially hazardous situations.
• Even if your headset is an open-air type designed to let you hear outside sounds, don't turn up the volume so high that you can't hear
what's around you.
14
Cause
Disc is damaged
Excessive external vibration
Requires headphones
or external amplifier
Poor connections
PAUSE is active
Batteries are weak
Dirty or damaged disc
Solution
Insert a new disc
Turn on ESP (p. 6) or find a more stable position
Put on headphones (p. 3) or connect to car stereo (p. 9)
Adjust volume
Check connections (p. 2-3, 8-9)
Press PLAY/PAUSE button to put in play mode
Replace batteries or try AC or Car DC power
Replace or clean the disc