Auxiliary Input; Additional Information; Troubleshooting Tips - RCA Ri171 User Manual

Note:
• When the unit is AC-powered, the iPod / iPhone will
charge automatically (until fully charged) once it is
docked in the cradle.
• Note that the use of this accessory with iPod or iPhone
may affect wireless performance.
• When playing iPod / iPhone, you can use the MENU,
, or ENTER button to navigate the iPod / iPhone
menu.
Pausing Playback
• Press the button.
• To resume playback, press the
Skipping to a Another Track
• Press either the
desired direction.
• Press the button to skip to the beginning of the
current track or previous track. Press
skip to the beginning of the next track.
Locating a Particular Point on a Track
• Keep either the
playback, according to the desired direction, and
release at the desired point.
Note: Please refer to the user's guide that was
included with your iPod/iPhone for more details.

Auxiliary input

1. Connect the auxiliary device to the AUX IN jack
with an audio cable (not provided).
2. Press SOURCE until the indicator "
the display.
3. Start playback from the auxiliary device.
4. Adjust the auxiliary device to mid-range volume
and adjust the master volume by pressing
VOLUME .
• Do not turn the volume of the auxiliary device too
high as this may affect the sound quality.
• For other playback operations, control them on your
auxiliary device.

Troubleshooting Tips

System doesn't turn on
• Unplug the unit for a moment, and then plug it back
in.
• Check the outlet by plugging in another devices.
No sound
• Adjust volume setting.
• Make sure you've selected the correct function.
Poor radio reception
• Make sure FM antenna wire is fully extended.
• Try turning off electrical appliances near the unit,
such as hair dryers, vacuum cleaners or fl uorescent
lights.
button again.
or button according to the
button to
or button pressed during
" lights on
iPhone/iPod does not dock properly or does not
install properly
• Remove your iPhone/iPod from the dock and check
for obstruction on the connectors in the dock and
on your iPhone/iPod. Make sure you are using the
appropriate adapter for your model of iPhone/iPod.
iPhone/iPod does not respond to the speaker sys-
tem.
• Make sure that your iPhone/iPod is working prop-
erly before docking into the unit. Please refer to
your iPhone/iPod manual for details.
ESD Remark:
In case of misfunction due to electrostatic discharge
just reset the product (disconnect and reconnect of
the power source may be required) to resume normal
operation.

Additional Information

Cleaning the exterior
• Disconnect the system from AC power before clean-
ing the exterior of the unit with a soft dust cloth.
• Clean the exterior with a soft clean cloth or slightly
moistened chamois leather. DO NOT use solvents
as it may cause damage to the unit.
EN - 5