What If There Are Problems; Warranty/Service - Beurer 76106 Instructions For Use Manual

Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.

13. What if there are problems?

If the scale detects and error when measuring, the following is displayed.
Display Cause
The maximum load-bearing capacity of
150 kg was exceeded.
The fat percentage is outside the measu-
rable range (less than 5 % or greater than
50 %).
The scale batteries are almost flat.
Scale zero setting is incorrect.
Self test.

14. Warranty/service

In case of a claim under the warranty please contact your local dealer or the local representation which is
mentioned in the list "service international".
In case of returning the unit please add a copy of your receipt and a short report of the defect.
The following warranty terms shall apply:
1. The warranty period for BEURER products is either 5 years or- if longer- the country specific warranty
period from date of Purchase.
In case of a warranty claim, the date of purchase has to be proven by means of the sales receipt or
invoice.
2. Repairs (complete unit or parts of the unit) do not extend the warranty period.
3. The warranty shall not be valid for damages because of
a. improper treatment, e.g. nonobservance of the user instructions.
b. repairs or tampering by the customer or unauthorised third parties.
c. transport from the manufacturer to the consumer or during transport to the service centre.
d. The warranty shall not be valid for accessories which are subject to normal wear and tear (cuff, batte-
ries etc.).
4. Liability for direct or indirect consequential losses caused by the unit are excluded even if the damage
to the unit is accepted as a warranty claim.
Remedy
The load must not exceed 150 kg (330 lb,
23 st : 8 lb)
Repeat the measurement barefoot or, if
necessary, moisten the soles of your feet
slightly.
Replace the batteries of scale.
Wait until the scale switches itself off. Now
correctly activate scale, wait for "0.0 kg" to
appear and repeat measurement.
Place scale on an even, hard surface and wait
for "0.0 kg" to appear.
18