EN | Operation
4.
Connect the plug to the disconnected socket of the connection you want to test.
5.
Lock this connection.
6.
Connect the high-voltage measurement module to the high-voltage test adapter according to the guided
fault finding.
You can now perform measurements in accordance with the guided fault finding.
Detaching the plug connections
Detaching the high-voltage plug connection
The plug connections have an automatic locking mechanism. To detach a plug connection:
1.
Make sure that the lever (red) is pulled out.
2.
Push in and hold the locking mechanism (gray).
3.
Swivel the clip (black) upward. This motion pushes the plug connection apart.
The plug connection is now detached.
11.VW.2210.2367_BA_V02_EN
VAS 6558A/40
12