Table of Contents
Advertisement
The out-of-the-box setting of the MR57 will have the second and third radio operating in the 5 GHz frequency band (Dual
5 GHz mode).
Note: When the MR57 is operating in Dual 5 GHz mode, the operating channels are restricted to UNII-1 and UNII-2a for
the first 5 GHz radio and UNII-2c and UNII-3 for the second 5 GHz radio
6GHz Configuration
The 6 GHz frequency band for the MR57 can be enabled from the RF Profile page in the dashboard
Wireless > CONFIGURE > Radio Settings>RF Profiles
Under RF Profiles, existing profiles can be modified or new profiles can be created.
Under RF Profiles, existing profiles can be modified or new profiles can be created. Then the profile can be edited under
the Flex radio selection for MR57. Using the drop-down menu, the 6 GHz band can be chosen for that particular RF
profile to support the tri-band operation for MR57
Once the 6 GHz band is enabled using the drop-down menu, 6 GHz capability can be enabled for all SSIDs
21
Advertisement
Table of Contents
