30
Accessing Components
Disconnect power before attempting maintenance or repair.
The gas valve and electrical components are located under the burner tray. To access the components,
follow the steps below.
Removing the Media Trays
Remove the glass wind guard and all
the crushed glass media (if already
installed).
Remove the (4) ¼" screws
that secure the media tray
ends to the media tray sides
(2 on each end). Lift the
media tray end pieces out of
the appliance and set them
aside for reinstallation.
Remove all the screws from the media tray(both sides) and remove the trays.
© Travis Industries, Inc.
Maintenance
WARNING
Left Side
8/17/22 - 1579
Right Side
Outdoor Complete Linear Fire Pits