Getting Started; How To Connect To The Web User Interface - D-Link DSL-G256DG User Manual

D-Link DSL-G256DG VDSL Router User Manual

Getting Started

This section will show you how to set up and configure your new D-Link router using the Web-based configuration utility.

How to connect to the Web User Interface

Connect to the Router
To configure the WAN connection used by the router it is first necessary to communicate with the router through its management interface, which is HTML-based and can be
accessed using a web browser. The easiest way to make sure your computer has the correct IP settings is to configure it to use the DHCP server in the router.
To access the web user interface, open a web-browser such as Internet Explorer and
enter the IP address of the router (10.0.0.138) into the address bar and press the
Enter key on your keyboard.
Type "Admin" in the User Name field and "Admin" in the Password field, and enter
the validation code. Click the Login button to proceed. If you get a Page Cannot be
Displayed error, please refer to the Troubleshooting section for assistance.
Tick the Remember my login info on this computer option to allow the browser to
remember the login information for the next login.
Basic Installation Page 13