Front Panel - Pioneer Elite SC-LX701 Basic Manual

> Before start > Hookup

Front Panel

1
15
1. INPUT SELECTOR dial: Switch the input to be played.
2. MCACC PRO indicator: This lights when you have
enabled the speaker calibration made with MCACC.
3. FL OFF indicator: This lights when you have pressed
DIMMER repeatedly to turn the display off.
4. INFO button: Switches the information on the display.
5. ZONE 2 ON/OFF button: Turn ZONE 2 on or off.
6. ZONE 3 ON/OFF button: Turn ZONE 3 on or off.
7. ZONE CONTROL button ( P27)
8. MULTI-ZONE MUSIC button ( P28)
9. Display ( P33)
10.Listening mode button ( P24)
11. NETWORK indicator: When the power of the unit is on,
this lights when "NET" is selected with the input selector
and the unit is connected to the network. If the unit is in
30
> Setup > Playback
2 3 4 5 6 7
16 17 18 19 20 21
standby mode, this lights when functions such as HDMI
CEC and network standby are enabled. It does not light
when ZONE 2/ZONE 3 is on, however.
12.Remote control sensor
13.WIRELESS indicator: Lights when the unit is connected
to the wireless network.
14.MASTER VOLUME dial
15.Í STANDBY/ON button
16.ADJUST button (AV Adjust) ( P28)
17.HOME button ( P29)
18.Cursor buttons (TUNE
ENTER button: Select the item with the cursors and
press ENTER to confirm your selection. When using the
TUNER, select the frequency with TUNE
preset stations with PRESET .
> Part Names
8 9 10 11 12 13
22 23 24 25 26
19. RETURN button: Returns the display to the previous state.
20. TUNING MODE button: Switches the tuning mode.
21. PHONES jack: Stereo headphones with a standard plug
22. MCACC SETUP MIC jack ( P22)
23. PHASE CONTROL button: This turns on or off the Phase
24. USB port: A USB storage device is connected so that music
/ PRESET button) and
25. AUX INPUT HDMI jack ( P14)
26. DIMMER button: You can adjust the brightness of the
, or select
27. Front flap
14
27
(1/4 inch or ø6.3 mm) are connected.
Control that corrects phase disturbance in the low range
to enhance the bass.
files stored in it can be played. You can also supply power
(maximum 5V/1A) to USB devices with a USB cable.
display in four steps.
27