Heinner HWM-V5080D++ Manual page 36

www.heinner.com
FAULT
Your machine vibrates.
Excessive foam is formed in
the detergent drawer.
POSSIBLE CAUSE
The feet of your machine
have not been adjusted.
Safety stays fitted for
transportation not
disassembled.
Less amount of laundry in the
appliance.
Your machine is over- loaded
with laundry or laundry
settled unevenly.
Your machine rests
on a hard surface.
Excessive amount of
detergent used.
Wrong detergent used.
5Kg, 220-240V~50Hz, 800rpm
TROUBLE- SHOOTING
Adjust the feet on your machine.
Disassemble the safety stays of
your machine.
This will not block operation of
your machine.
Do not put in laundry more than
the amount recommended and
settle the laundry in the machine
evenly
Prevent your machine
resting on hard surfaces.
Press on Start/Pause button. To
eliminate foam formation, mix a
spoon of softener with half
litres of water, and pour the mixture in
the detergent drawer. After 5-10
minutes, Press on Start/ Pause button
again. In your next washing operation,
Adjust the detergent dose accordingly.
Use detergents produced only for
automatic washing machines in your
machine.
from
35