Table of Contents
Advertisement
2. Receive data
2-1 Channel information
2-2 System information
Downloaded from:
http://www.usersmanualguide.com/
#1 Note On
This message can be received on the currently selected MIDI channel.
If the MIDI Trigger parameter is ON, it will be received as a gate trigger.
When a pitch-type reverb program is selected, it will be received to control the pitch. The veloc-
ity value is ignored. If the Base Key parameter is OFF, the pitch will not be controlled.
STATUS
NOTE No.
VELOCITY
#2 Control Change
This message can be received on the currently selected MIDI channel.
When this message is received, it will control the parameter being modified by the correspond-
ing foot controller as specified by the Control Assign table.
STATUS
CONTROL No
CONTROL VALUE
#3 Program Change
This message can be received on the currently selected MIDI channel.
When this message is received, a program will be selected as specified by the Program Change
table of that bank.
STATUS
PROGRAM No.
#1 Program bulk dump request
This message can be received on the currently selected MIDI channel.
When this message is selected, the program of the specified User program number will be trans-
mitted as bulk data.
STATUS
ID No.
SUB STATUS
FORMAT No.
DATA NAME
PROGRAM No.
EOX
1001nnnn(9nH)
n=0-15
0kkkkkkk
k=0-127
0vvvvvvv
v=0-127
1011nnnn(BnH)
n=0-15
0ccccccc
c=1-31, 64–95
0vvvvvvv
v=0–127
1100nnnn(CnH)
n=0-15
0pppppp0
c=0-127
11110000(F0H)
01000011(43H)
0010nnnn(2nH)
n=0-15
01111110(7EH)
01001100(4CH)
"L"
01001101(4DH)
"M"
00100000(20H)
Space
00100000(20H)
Space
00111000(38H)
"8"
01000001(41H)
"A"
00111000(38H)
"8"
00110011(33H)
"3"
01001101(4DH)
"M"
0mmmmmmm
m=1-90
11110111(F7H)
Add-5
MIDI data format
ProR3 Digital Reverberator
Advertisement
Table of Contents
