–
Remove cotter pin
linings.
–
Clean the brake caliper and brake caliper support.
E00351-10
–
Check that leaf spring
6
plate
in the brake caliper support are seated correctly.
E00352-10
–
Insert the new brake linings, insert the pin, and mount the cot-
ter pins.
Info
Always change the brake linings in pairs.
–
Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
E00353-01
–
Add brake fluid to level
Brake fluid DOT 4 / DOT 5.1 (
–
Mount screw cap
Info
Clean up overflowed or spilled brake fluid immediately
with water.
K00565-10
BRAKE SYSTEM 13
3
4
, pull out pin
, and remove the brake
5
in the brake caliper and sliding
A
.
p. 155)
1
2
with membrane
and O-ring.
105