Cleaning The Shaver Under The Tap - Philips S7882 Manual

Activating the travel lock
3 sec.
How do I clean my appliance?

Cleaning the shaver under the tap

Press the on/off button for 3 seconds to use the travel
lock mode.
When the travel lock is activated, the travel lock symbol
flashes.
Note: Bluetooth is switched off when the travel lock is
activated.
Deactivating the travel lock
Press the on/off button for 3 seconds.
Once the travel lock is deactivated, the appliance
switches on automatically.
Note: The shaver unlocks automatically when it is
connected to a wall socket.
Clean the appliance and the attachments after each use
for optimal performance.
Clean the shaver after each use to prevent clogging and
damage.
Never dry the shaving unit with a towel or tissue, as
this may damage the shaving heads.
While rinsing the shaving unit, water may drip out of
the base of the shaver. This is a normal occurrence.
1 Switch on the shaver.
2 Rinse the shaving unit under a warm tap.
3 Switch off the shaver. Press the release button to
open the shaving unit.
17
English