Philips S7882 Manual page 21

Using the Quick Clean Pod
5 Place the Quick Clean Pod Cartridge into the Quick
Clean Pod.
6 Put the top of the Quick Clean Pod back onto the base
and turn it clockwise until you hear a click.
Do not tilt the Quick Clean Pod to prevent leakage.
Note: If you use the shaver with shaving foam, shaving
gel or pre-shave products, thoroughly rinse the shaving
heads before you use the Quick Clean Pod.
Always shake excess water off the shaver before you
place it in the Quick Clean Pod.
1 Place the shaver upside down into the Quick Clean
Pod. The shaver automatically detects that it is in the
Quick Clean Pod.
2 Switch on the shaver to start the cleaning program.
Each cleaning program takes approximately one
minute. During the cleaning program the cleaning
symbol lights up continuously and the blue icon
pulses.
The shaver handle vibrates twice quickly when the
cleaning program is finished.
3 Let the shaver air-dry completely in the Quick Clean
Pod before storing it.
21
English