Specifications - Dolmar AX-1821H Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. CHECK button
4-1. Lock-off button
4-2. Switch trigger
5-1. Indication lamp
6-1. Change lever
6-2. Protrusion on base frame
6-3. Base frame
7-1. Shear blades
7-2. Blade cover
7-3. Blade frame
9-1. Groove
9-2. Base frame
10-1. Change lever
10-2. Protrusion on base frame
10-3. Base frame
11-1. Blade cover
12-1. Locking lever
12-2. Undercover
12-3. Press
12-4. Turn
13-1. Undercover
13-2. Shear blade
13-3. Crank
14-1. Crank

SPECIFICATIONS

Effective cutting width
Stroke per minute (min
Battery cartridge
Dimensions (L x W x H)
(Optional accessory)
Blade length of optional hedge shear blades
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Explanation of general view
14-2. Undercover
14-3. Shear blades
15-1. Blade cover
15-2. Shear blades
16-1. Basic alignment line on the tool
16-2. Pins
17-1. Recessed part of crank
17-2. Crank
17-3. Apply grease
17-4. Pins
18-1. Base plate
18-2. Hole in the base plate of shear
18-3. Oval holes that are overlapped
20-1. Undercover
20-2. Locking lever
22-1. Groove in the undercover
22-2. Locking lever
26-1. Brush
27-1. Machine oil
28-1. Crank
28-2. Undercover
28-3. Shear blades
29-1. Base plate
29-2. Oval holes that are overlapped
29-3. Hole in the base plate of shear
30-1. Blade cover
Model
-1
)
Rated voltage
Net weight
Battery charger
housing
blades
blades
AP-181 / AP-1815 / BL1815N /
BL1820 / BL1820B
337 mm x 176 mm x 130 mm
6
31-1. Bent part of the base plate of
shear blades
32-1. Screws
33-1. Locking lever
33-2. Undercover
35-1. Groove in the undercover
35-2. Locking lever
36-1. Blade cover
37-1. Locking lever
37-2. Undercover
37-3. Press
37-4. Turn
38-1. Undercover
39-1. Screws
40-1. Crank
40-2. Shear blades
41-1. Grass shear blade cover
41-2. Grass shear blade
41-3. Storage case
44-1. Trimming direction
44-2. Tilt the blades
44-3. Hedge surface to be trimmed
45-1. String
49-1. Clamping nuts
49-2. Chip receiver
49-3. Screws on the shear blades
49-4. Blade cover to be always installed
before installing the chip receiver
50-1. Hook hole
AX-1821H
160 mm
1,250
D.C. 18 V
AP-183 / BL1830 / BL1830B /
BL1840 / BL1840B / BL1850 /
353 mm x 176 mm x 130 mm
1.4 kg
LG-184 / DC18RC
200 mm
BL1850B / BL1860B
1.6 kg