Removing the display assembly
1.
Follow the procedure in
2.
Remove the:
a.
battery cover
b.
battery
c.
base cover
d.
hard drive
e.
keyboard
f.
WLAN card
g.
WWAN card
h.
palmrest
3.
Perform the following as shown in the illustration:
a. Remove the screws that secure the display hinge cap to the computer [1].
b. Remove the display hinge cap from the computer [2].
4.
Perform the following steps as shown in the illustration:
a. Flip the computer and remove the cosmetic screws from the bottom and back of the computer
[1].
b. Pull up the antenna cables through the routing hole [2].
Before working inside your
computer.
29