Installing The Wlan Card; Removing The M.2 Solid State Drive (Ssd) - Dell Precision 177 7710 Owner's Manual

b. battery
c. base cover
3. Perform the following steps to remove the WLAN card from the computer:
a. Remove the screw that secures the WLAN card to the computer.
b. Remove the shield that secure the antenna cables.
c. Disconnect and un-route the antenna cables connected to the WLAN card and remove the
WLAN card from the computer.

Installing the WLAN Card

1. Insert the WLAN card in its slot in the computer.
2. Route the antenna cables through the routing channel and connect them to the WLAN card.
3. Align the shield and tighten the screw to secure the WLAN card to the computer.
4. Install the:
a. base cover
b. battery
c. battery cover
5. Follow the procedures in

Removing the M.2 Solid State Drive (SSD)

1. Follow the procedures in
2. Remove the:
a. battery cover
b. battery
c. base cover
3. Perform the following steps as shown in the illustration:
a. Remove the screw that secures the shield to the computer.
b. Remove the shield from the computer.
c. Remove the screw that secures the M.2 SSD to the computer.
d. Remove the M.2 SSD away from the computer.
18
After working inside your computer
Before working inside your computer.