Volvo XC90 Owner's Manual page 591

Removing the plastic cover to
replace bulbs
The headlight bulbs can be replaced without
the assistance of a workshop, but before a
bulb can be replaced, the plastic cover over
the headlight needs to be removed.
Lift the rubber strip by pressing it inward
into the engine compartment.
Release the pins in the plastic cover's four
clips by pressing them down with a
screwdriver or similar object and remove
the covering.
Put the cover back in place in the reverse
order.
Related information
Replacing bulbs (p. 588)
•
Replacing the low beam headlight bulbs
•
(p. 591)
Replacing the high beam headlight bulbs
•
(p. 591)
Replacing daytime running lights/front
•
parking light bulbs (p. 592)
Replacing front turn signal bulbs
•
(p. 593)
Bulb specifications (p. 594)
•
MAINTENANCE AND SERVICE
Removing the rectangular
headlight cover
Most of the bulbs in the headlight housing
can be accessed when the rectangular cover
is removed.
Before the rectangular cover can be removed,
the plastic covering over the headlight must
be removed.
Left headlight.
1. Undo the four screws of the cover using a
Torx tool, dimension T20 (1). Do not undo
these completely; 3–4 turns is enough.
Push the cover to the side.
3. Remove the cover.
Put the cover back in place in the reverse
order.
}}
589