Volvo XC90 Owner's Manual page 425

Leveling control settings*
Turn off leveling control before lifting the
vehicle with a jack to help avoid problems
with the pneumatic suspension.
The vehicle can be lowered or raised to make
it easier to load or for passengers to get in
and out.
Adjusting loading mode
Use the buttons in the cargo compartment to
raise or lower the rear section of the vehicle to
facilitate loading or unloading the vehicle or
connecting or disconnecting a trailer.
Center display settings
Easy Entry and Exit Suspension Control
The vehicle can be lowered to make it easier
to get in and out.
Activating easy entry in the center display:
1. Tap Settings in the Top view.
2. Tap My Car Mirrors and
3. Select Easy Entry and Exit Suspension
Control .
> When the vehicle is parked and the
engine is turned off, the level is low-
ered. (Level adjustment will stop if a
side door is opened and will resume
after a slight delay when the door has
been closed.) When the engine is
started and the vehicle begins to move,
the level will be raised to the height set
by the selected drive mode.
Disable Leveling Control
In certain situations, this function must be
turned off, e.g. before the vehicle is raised
using a jack*. The level difference caused by
raising the vehicle with a jack could cause
problems with the pneumatic suspension.
Turning off the function in the center display:
1. Settings
Tap in the Top view.
2. Tap My Car Parking Brake and
Suspension.
3. Select Disable Leveling Control
Related information
Leveling control* and suspension (p. 420)
•
Loading recommendations (p. 561)
•
Low Speed Control*
The low-speed function (LSC
Convenience.
and improves control and traction on rough
roads and slippery surfaces, e.g. when towing
a trailer on grass or up boat ramps.
In vehicles equipped with drive mode con-
trol*, the function is included in the
drive mode.
Low Speed Control is designed for driving on
rough roads and when towing trailers at low
speeds, up to approximately 40 km/h (25
mph).
When driving at low speeds, LSC prioritizes
low gears and all-wheel drive to help avoid
wheel spin and improve traction on all wheels.
The accelerator pedal will be less responsive
to improve traction and speed control at low
speeds.
The function is activated together with Hill
Descent Control (HDC
sible to control speed going down steep hills
using the accelerator pedal and reduces the
need to use the brake pedal. The system
makes it possible to maintain a low and uni-
form speed when driving down steep hills.
.
STARTING AND DRIVING
12 ) facilitates
Off Road
13 ), which makes it pos-
}}
423
* Option/accessory.