Connecting To Pc; Pc With Ethernet Adapter - D-Link DSL-2750U User Manual

DSL-2750U Wireless N300 ASDL2+ Router with Ethernet WAN Support
User Manual

Connecting to PC

PC with Ethernet Adapter

1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router
and the Ethernet port of your PC.
2. To connect the device to a DSL line: connect a phone cable between the DSL port of the
router and the ADSL OUT port of the splitter. Connect your phone to the PHONE port of
the splitter. Then connect another phone cable between a phone jack and the ADSL IN port
of the splitter.
3. To connect the device to an Ethernet line: please connect the router to the ISP's Ethernet
line only after setting the WAN port and creating the Internet connection (see the Initial
Configuration Wizard section, page 32).
4. Connect the power cord to the power connector port on the back panel of the router, then
plug the power adapter into an electrical outlet or power strip.
5. Turn on the router by pressing the ON/OFF button on the back panel.
Then make sure that your PC is configured to obtain an IP address automatically (as DHCP client).
Page 15 of 173
Installation and Connection