D-Link DSL-2750U User Manual page 48

DSL-2750U Wireless N300 ASDL2+ Router with Ethernet WAN Support
User Manual
In the WAN section, click the Add icon
You can specify the following parameters:
Parameter
Name
Interface
VPI
VCI
Encapsulation
QoS class
( ).
Figure 36. Adding a connection.
A name for the connection for easier identification (you can specify
any name).
Select the value corresponding to the LAN port specified as the
WAN port for connection to an Ethernet line or the ATM value for
connection to an ADSL line.
For the ATM value only.
Virtual Path Identifier. The valid range is from 0 to 255.
For the ATM value only.
Virtual Circuit Identifier. The valid range is from 32 to 65535.
For the ATM value only.
Select LLC or VCMUX from the drop-down list.
For the ATM value only.
A class of traffic for this connection.
UBR
(Unspecified Bit Rate): The UBR service is used for applications that
allow various delays and losses of packets. It is appropriate to use
the UBR service for text/data/image transfer applications, as well as
messaging, distribution, retrieval, and remote terminal applications.
Page 48 of 173
Configuring via Web-based Interface
Description