Jocel JFE014641 Instruction Manual page 97

4.5 COOKING END TIME SETTING FUNCTION
In the state of function to be selected, press button "
"AUTO" and oven in use symbol "
time（The first setting shows the current system time by default), cooking end
time and decimal point symbol "
19(Suppose current system time is 0:00). When the icon "AUTO" and oven in
use symbol " "twinkle, you can set cooking end time by pressing "
well set diagram see Pic 20(Suppose cooking end time is 0:30).
Pic 19 Cooking end time setting
initial state
After choosing the time, lift the finger off the buttons and wait for 5 seconds, then
the icon "AUTO" and oven in use symbol "
always bright. Display screen will show system time, decimal point symbol "
and system time keep bright. It means time is well set. See Pic 21.
Whenever user wants to adjust the timer, in the working status, push "
times, when user sees the icon "AUTO" twinkles, it will show the set cooking end
time, and user can adjust the time again. After setting is done, the display will
change back to system time.
Pic 21 Cooking end time working
status (All the icons always bright)
Pic 23 Cancel "Auto" function symbol display diagram (After cooking finished)
"twinkle, display screen shows cooking end
" keep bright. Display effect see Pic
Pic 20 Cooking end time well set
"stop twinkling and change to
Pic 22 Cooking finished diagram
(All the icons flickering)
97
" 4 times, then icon
"or"
state
" four
",
"