Jocel JFE014641 Instruction Manual page 94

Pic 6 Clock setting state diagram
(second icon flickering)
Press button" " again for 3 seconds,
oven is turned off and returns to standby status. The display of pic 6 is flashing.
Note 1：System time setting range is 0：00-23：59.
Note 2：When setting the time for each function of the timer, you can set the time
by short press or long press "
reduce 1 minute each press of the button, while long press will quickly increase
or decrease the time by 1 minute, so it can set the time fast.
4.3 ALARM CLOCK SETTING FUNCTION
In the state of function to be selected, when the display shows the system time,
oven in use symbol"
two times, then the clock icon"
alarm clock time(First set default display "0·00"), alarm clock time and decimal
point symbol "
twinkles, Press"
10 (Set 10 minutes).
Pic 9 Alarm clock setting initial state
(alarm clock icon flickering)
Pic 8 System time well set diagram
" and "
" and decimal point symbol "
"twinkles, and the screen display changes to the
" always display , like pic 9.When the alarm clock icon"
"or" " to set the clock. Alarm clock well set diagram like pic
Pic 7 Feature to be selected state
diagram (second icon always
",short press will add 1 minute or
" keep bright, press "
Pic 10 Alarm clock well set
(alarm clock icon flickering)
94
bright)
"
"