GEONAUTE ONstart 710 Manual

ONstart 710
EN
1
Intuitive guide
LAP-SPLIT / Reset / Decrease
2
Start / Standby
This product can be switched to standby to increase battery life.
 To start
 To switch to standby
NOTE: ONstart 710 can be switched to standby manually if the stopwatch and timer are at zero.
ONstart 710 switches to standby mode automatically after 24 hours.
3
Accessing the functions
Press the Mode button (B) in succession to access the various functions.
STOPWATCH: Stopwatch (1/100s up to 99h59min59s) with 300 split times
•
TIMER: 3 types of countdown:
•
MATCH: countdown with several programmable times (see page 3/8)
 
COACH: with several customisable workouts (see page 3/8)
 
UPDOWN: countdown followed by a stopwatch (see page 4/8)
 
TIME: Time and date
•
ALARM: Alarm
•
SPEED: Calculates speed over a set distance according to time (kms or miles)
•
PACER: Sets a cadence (from 1 to 240 beeps/min)
•
STROKE: Measures average frequency (from 2 to 99 cycles)
•
Note: For each function, when set for the first time, ONstart 710 will switch automatically to settings mode.
B B
B
Mode / Validation / (Settings)
A
LAP
SPLIT
E
Backlight / Settings
► Press C for 2 seconds
► Go to "TIME" or "ALARM" mode
► Press C for 5 seconds
B
B B
B
Start / Pause / Increase
C
Main display
D
RECALL: Recall split time
B B
B
1/8
Return
B
B B