Table of Contents
Advertisement
Installing the processor
1
Align the processor with the socket keys.
2
Align the pin-1 indicator of the processor with the triangle on the socket.
3
Place the processor on the socket such that the slots on the processor align with the socket keys.
4
Close the processor shield by sliding it under the retention screw.
5
Lower the socket lever and push it under the tab to lock it.
6
Install the:
a
heat sink
b
fan duct
c
optical drive
d
hard drive assembly
e
front bezel
f
cover
7
Follow the procedure in
Removing the VGA daughter board
1
Follow the procedure in
2
Remove the:
a
cover
b
fan duct
3
To remove the VGA daughter board:
a
Remove the screws that secure the VGA connector to the computer [1].
b Slide the VGA connector to release it from the computer [2].
c Remove the screw that secures the VGA daughter board to the computer [3].
d Lift the VGA daughter board using the handle to remove it from the computer [4].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Removing and installing components
16
Advertisement
Table of Contents
