Installing the hard drive assembly
1
Insert the hard drive assembly into the slot on the computer.
2
Connect the power cable to the slot on the hard drive bracket.
3
Install the:
a
fan duct
b
cover
4
Follow the procedure in
Removing the optical drive
1
Follow the procedure in
2
Remove the:
a
cover
b
front bezel
c
hard drive assembly
3
To release the optical drive:
a
Remove the hard drive connector cables from the optical drive latch [1].
b Slide the blue latch to the unlock position [2].
4
To remove the optical drive:
a
Holding the blue latch [1], lift the optical drive cage and disconnect the cables from the optical drive. [2]
b Lift the optical drive cage away from the computer [3].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Removing and installing components
12