Installing The Fan Duct; Removing The Memory Module; Installing The Memory Module - Dell OptiPlex 3046 Owner's Manual

Installing the fan duct

1 Align the slots on the fan duct, with the screws on the heat sink.
2 Insert the fan duct until it clicks into place.
3 Install the cover.
4 Follow the procedure in

Removing the memory module

1 Follow the procedure in
2 Remove the:
a cover
b fan duct
c hard drive assembly
d optical drive
3 To remove the memory module:
a Press the memory module retention tabs on both sides of the memory module.
b Lift the memory module from the memory module connector on the system board.

Installing the memory module

1 Align the notch on the memory module with the tab on the memory module connector.
2 Insert the memory module into the memory module socket.
3 Press the memory module until the memory module retention tabs click into place.
4 Install the:
a optical drive
b hard drive assembly
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
Removing and installing components 8