1) Remove the panel
9
Remove the
water
collecting
2) Remove the electronic
control box
assembly
3) Unscrew the 4 screws
inside the 4 holes (1 is
under a protection cover)
to remove the water
collecting assembly.
4) Take out the water
collecting assembly
Remove the
1) Remove the panel
10
draining
2) Remove the electronic
pump
control box
3) Remove the water
collecting assembly
4) Disconnect the drain
pipe.
5) Remove 2 screws to
remove the pump
supporter. Be careful of
the connection wires.
Repeat the operation of No.2
Repeat the operation of No.6
Repeat the operation of No.2
Repeat the operation of No.6
Repeat the operation of No.9
39