Carrier 40MB C Series Service Manual page 36

4 Remove the 1) Remove the panel
swing
2) Unscrew the 3 screws to
motor
remove the swing motor
assy.
3) Unscrew 1 screw to
remove the swing motor.
5 Remove the 1) Open the grille
PCB
2) Disassemble the
electronic control box
cover after remove the 2
screws.
board cover(4
screws)
Remove the display
board(4 screws)
Repeat the operation of step1,2,3 of No.2
Repeat the operation of step1 of No.1(No need
to remove the panel)
36
3 screws
1 screw
4 screws
2 screws